Magnetic level gauges work on the principle of communicating vessels, therefore the level in the measuring chamber will be the same as the level in the vessel. The measuring chamber is fitted with a float, which has a magnet inside. The float with magnet will float on the medium and the magnet in the float will turn the flaps of the indicating rail.
The float in the measuring tube is standard not pressurized and has no magnetic or mechanical guidance. This construction makes the float less dangerous than a float which is standard pressurized. When necessary Hadro can produce a pressurized float. With the below mentioned process conditions it is possible to select a float which will float on the medium. - Medium - Density - Working pressure - Temperature
Customer benefits:
Low installation, maintenance, and engineering cost High visibility Safe installation and operation 2 year warranty on Chamber, Float and Indication Assembly Industries served:
Oil and Gas Petrochemical Chemical Power Generation Water and wastewater treatment Food and Beverage Pharmaceutical Pulp and Paper Biotech Semiconductor
Specifications
Connection From ½” to 2” flange type, JIS, ANSI, DIN rating available; special size on request Pressure Limited 20 kg/cm² for Metal chamber type (Stainless Steel) Temperature Limited -20~150°C for Metal chamber type (Stainless Steel) Center to Center Length min 200mm, maximum 5700mm Accuracy ±8mm Indicating Case Material / Protection Class SS304 / IP66 Indicating Strips Material SS304 Indicating Float Material SS316 Specific Gravity 600~2000 kg/m³ Chamber Size ø60mm
ORDERING INFORMATION:
Thông số mẫu báo giá Magnetic Level Gauge Brand : KHD/VIETNAM Model : MLG80-5700mm Process Temperature : -20 to 150 degree C Pressure Limited : 10kg/cm2 Protection Class : IP 66 Indicating Strips Material: SS304 Indicating Float Material: SS316 Scale Plate : yes Process connection type : JIS 10K Process connetion size : 1/2" Vent type & size : 1/2" NPT Drain type & size : 1/2" NPT Specific Gravity : Accuracy : 8mm